Intel SAI2 Product Specification - Page 63
RJ-45 LAN Connector J2, USB Connectors J2, IDE Connectors PRI_IDE, SEC_IDE
UPC - 735858149563
View all Intel SAI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
SAI2 Server Board TPS Jumpers and Connectors 4.3.11 RJ-45 LAN Connector (J2) Table 43. RJ-45 LAN Connector Signals Pin Signal Description 1 TX+ Transmit data plus-the positive signal for the TD differential pair contains the serial output data stream transmitted onto the network 2 TX- Transmit data minus-the negative signal for the TD differential pair contains the same output as pin 1 3 RX+ Receive data plus-the positive signal for the RD differential pair contains the serial input data stream received from the network 4 NC 5 NC 6 RX- Receive data minus-the negative signal for the RD differential pair contains the same input as pin 3 7 NC 8 NC 4.3.12 USB Connectors (J2) Table 44. USB Connectors USB 1 Pin 1 2 3 4 Signal +5 VDC USB_P1_N USB_P1_P GND USB 2 Pin 1 2 3 4 Signal +5 VDC USB_P0_N USB_P0_P GND 4.3.13 IDE Connectors (PRI_IDE, SEC_IDE) If no IDE drives are present, no IDE cable should be connected. If a single IDE drive is installed, it must be connected at the end of the cable. Pin Signal 1 RESET_L 2 3 DD7 5 DD6 7 DD5 9 DD4 1 11 DD3 13 DD2 15 DD1 Table 45. IDE Connector Pinout IDE Connector Pin Diagram Pin Signal 2 GND 40 4 DD8 6 DD9 8 DD10 39 10 DD11 12 DD12 14 DD13 16 DD14 Revision 1.0 53