Intel SAI2 Product Specification - Page 35

SAI2 Server Board TPS Basic Input Output System (BIOS) Feature 32 Bit I/O Transfer Mode Ultra DMA Mode Choices or Display Only Disabled Enabled Standard Fast PIO 1 Fast PIO 2 Fast PIO 3 Fast PIO 4 FPIO 3/ DMA 1 FPIO 4 / DMA 2 Disabled Enabled Description Enable/Disable 32-Bit IDE data transfers Select the method of moving data to and from the hard drive. (If Type: Auto is select, optimum transfer mode will be selected) Enable/Disable Ultra DMA mode (If Type: Auto is select, optimum transfer mode will be selected) User Setting 3.2.2.5 Advanced Menu Selections The following tables describe the menu options and associated submenus available on the Advanced Menu. Please note that MPS 1.4 / 1.1 selection is no longer configurable. The BIOS will always build MPS 1.4 tables. Table 9. Advanced Menu Selections Feature Advanced Memory Reconfiguration CPU Reconfiguration Peripheral Configuration PCI Device Option ROM Numlock Choices or Display Only Description Refer to Advanced Submenu. Refer to Memory Reconfiguration Submenu. Refer to CPU Reconfiguration Submenu. Refer to Peripheral Reconfiguration Submenu. Refer to PCI Device Submenu. Refer to Option ROM Submenu. It Disables/Enables the Option ROM BIOS on the PCI Bus. Refer to Numlock Submenu. User Setting Table 10. Advanced Submenu Selections Feature Installed OS Reset Configuration Data Boot-time Diagnostic Screen POST Error Pause Choices or Display Only Other PnP OS No Yes Enabled Disabled Enabled Disabled Description Selects the type of operating system that will be used most. Clears the Extended System Configuration Data if selected. Enable/Disable boot-time diagnostic screen. Splash screen is displayed over the diagnostic screen when is option is Disabled. Pauses and displays SETUP entry or resume boot prompt if error occurs on boot. If disabled, system always attempts to boot. User Setting Revision 1.0 25