Invacare TDXSPREE-CG Owners Manual 2 - Page 105
CMPJ+ Joysticks
View all Invacare TDXSPREE-CG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
CMPJ+ Joysticks For this procedure, refer to FIGURE 11. Disconnecting 1. Pull the latch away from the joystick connector. 2. Disconnect the joystick connector from the remaining connectors Connecting Ensure the gaskets are installed in the top connector cap and between network connectors. 1. Ensure the latch is pulled away from the network connector. 2. Connect the network connector to the other connectors. 3. Top and Bottom Connectors - Install connector caps onto the network connector. 4. Push the latch in to secure the network connectors and caps. 5. If necessary secure excess cable using tie-wraps. Top Connector Cap Network Connectors 7 SETUP/MAINTENANCE Latch Gasket Controller Cable Gasket Bottom Connector Cap Gasket FIGURE 11 Disconnecting/Connecting the Joysticks - CMPJ+ Joysticks Part No 1149267 105 Invacare® TDX® SC, Invacare TDX Spree