Invacare TDXSPREE-CG Owners Manual 2 - Page 95
Replacing the Batteries, Disconnecting/Connecting Battery Cables
View all Invacare TDXSPREE-CG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
7.7 Replacing the Batteries Refer to Disconnecting Battery Cables on page 95. 7 SETUP/MAINTENANCE Disconnecting/Connecting Battery Cables Disconnecting Battery Cables ƽ WARNING The use of rubber gloves is recommended when working with batteries. NEVER allow any of your tools and/or battery cables to contact both battery terminals at the same time. An electrical short may occur and serious personal injury or damage may occur. For this procedure, refer to FIGURE 5 on page 98. 1. Remove the batteries. Refer to Removing/Installing the Batteries From/Into the Wheelchair on page 85. 2. Cut the tie-wrap that secures the battery terminal cap in place (Detail "B" of FIGURE 5). 3. Slide terminal caps up onto the battery cables. 4. Disconnect POSITIVE (+) battery cable from the POSITIVE (+) battery terminal. 5. Disconnect NEGATIVE (-) battery cable from NEGATIVE (-) battery terminal. Part No 1149267 95 Invacare® TDX® SC, Invacare TDX Spree