Invacare TDXSPREE-CG Owners Manual 2 - Page 94
TDX Spree seating
View all Invacare TDXSPREE-CG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
7 SETUP/MAINTENANCE Removing/Installing the Elevating Seat Assembly For this procedure, refer to FIGURE 4. It is strongly recommended that two assistants lift the seat assembly when performing this procedure. Removing 1. Disconnect the joystick. Refer to Disconnecting/Connecting the Joysticks on page 104. 2. Remove the seat cushion. 3. Remove the two socket screws securing the seat pan to the seat frame. 4. Remove the seat pan from the seat frame. 5. Remove the four mounting bolts and locknuts securing the seat assembly to the actuator post. 6. Remove the seat assembly from the actuator post and set aside. Installing 1. Position the seat assembly onto the actuator post. Mounting Bolts Seat Assembly Actuator Post Complete seat assembly not shown. Seat pan and socket screws not shown. TDX SC with elevating seat shown. TDX Spree seating removes the same. 2. Using four mounting bolts and locknuts, secure the seat assembly to the actuator post. Securely tighten. 3. Position the seat pan onto the seat frame as shown. 4. Using the two socket screws, secure the seat pan to the seat frame. 5. Install the seat cushion. Locknuts 6. Connect the joystick. Refer to Disconnecting/Connecting the Joysticks on page 104 FIGURE 4 Removing/Installing the Elevating Seat Assembly Invacare® TDX® SC, Invacare TDX Spree 94 Part No 1149267