Invacare TDXSPREE-CG Owners Manual 2 - Page 60

Disengaging/Engaging Motor Lock Levers, Outside of, Wheelchair

Get Invacare TDXSPREE-CG PDF manuals and user guides View all Invacare TDXSPREE-CG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

5 WHEELCHAIR OPERATION 5.7 Disengaging/Engaging Motor Lock Levers ƽ WARNING DO NOT engage or disengage motor locks until the power is in the OFF position. CAUTION Ensure both motor release levers are fully engaged before driving the wheelchair.  For this procedure, refer to FIGURE 13. Motor lock disengagement/engagement allows free-wheeling or joystick controlled operation. Free-wheeling allows an assistant to maneuver the wheelchair without power. Motor lock levers are located between the rear caster assembly and drive wheel on both sides of the wheelchair. 1. Perform one of the following as if viewing the motors from behind the wheelchair (Detail "A"): • Engage (DRIVE) - Push motor lock levers in, towards the wheelchair to engage the motor. • Disengage (PUSH) - Pull motor lock levers out, away from wheelchair to disengage the motor. ENGAGE MOTOR (Drive) - Move Motor Lock Lever DOWN Motor Lock Lever Drive Wheel Rear Caster Outside of Wheelchair DISENGAGE MOTOR (Push) Move Motor Lock Lever UP FIGURE 13 Disengaging/Engaging Motor Lock Levers Invacare® TDX® SC, Invacare TDX Spree 60 Part No 1149267

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
5
WHEELCHAIR OPERATION
Invacare® TDX® SC, Invacare TDX Spree
60
Part No 1149267
5.7
Disengaging/Engaging Motor Lock Levers
1.
Perform one of the following as if viewing the motors from behind
the wheelchair (Detail “A”):
•
Engage (DRIVE) - Push motor lock levers in, towards the
wheelchair to engage the motor.
•
Disengage (PUSH) - Pull motor lock levers out, away from
wheelchair to disengage the motor.
FIGURE 13
Disengaging/Engaging Motor Lock Levers
±
WARNING
DO NOT engage or disengage motor locks until the power is in the OFF position.
CAUTION
Ensure both motor release levers are fully engaged before driving the wheelchair.
For this procedure, refer to FIGURE 13.
Motor lock disengagement/engagement allows
free-wheeling or joystick controlled operation.
Free-wheeling allows an assistant to maneuver the
wheelchair without power.
Motor lock levers are located between the rear
caster assembly and drive wheel on both sides of
the wheelchair.
Rear
Caster
Drive Wheel
DISENGAGE MOTOR (Push) -
Move Motor Lock Lever UP
ENGAGE MOTOR
(Drive) -
Move Motor Lock
Lever DOWN
Motor Lock Lever
Outside of
Wheelchair