JVC DLA-G20U DLA-G20U User instruction manual (2.6MB) - Page 28
Select the video input to be projected, Adjust the screen size
View all JVC DLA-G20U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Basic Operations (Cont.) s Projector's buttons STAND BY LAMP TEMP EMERGENCY VIDEO COMPUTER SETTING +3 QUICK ALIGN -2 VIDEO button COMPUTER button 2. Select the video input to be projected s Press the VIDEO button or the COMPUTER button to switch the input. • Each time you press either button, the selected input changes as follows. s When you press VIDEO: Y/C VIDEO YPBPR s When you press COMPUTER: COMP 1 COMP 2 Remote control unit COMPUTER VIDEO Screen display Line display Projector VIDEO COMPUTER Channel display ENGLISH s Remote control unit OPERATE COMPUTER VIDEO COMPUTER button VIDEO button T VOL. ZOOM FOCUS ZOOM (T/W) buttons W PAGE BACK MENU/ENTER PRESET QUICK ALIGN. AV MUTING ATTENTIONS • DO NOT give any shock to this projector while operating it; otherwise, the light-source lamp goes off (the EMERGENCY indicator lights up). If the shock turns off the light-source lamp - Turn off the power by pressing the MAIN POWER switch, then turn it on again. Now you can operate the projector as usual. YPBPR CH: 1 NTSC(480i) Source display * When the input is switched, the line display (ex. VIDEO) and the source display (ex. NTSC(480i)) are shown on the upper part of the screen (they disappear in about five seconds). However, they will not be shown if LINE DISPLAY in "Setting and Adjusting Other Functions (OPTIONS)" on page 44 is set to OFF. (For setting the source, see page 47.) Also, when a channel is set, the channel display is shown on the upper right corner of the screen. (For setting up channels, see page 31,49 and 54.) Note • To select the proper audio input for video input The video input terminal (AV IN input terminal) can be switched with the VIDEO button. However, since this projector has only a single audio input terminal, reconnect audio input in accordance with the AV device to be used. 3. Adjust the screen size s Adjust the screen size with the remote control's ZOOM (T/W) buttons. s To enlarge the screen size: Press the ZOOM (W) button. s To reduce the screen size: Press the ZOOM (T) button. Remote control unit T ZOOM W Note • The adjustment of the screen size (zoom adjustment) can also be made on the setting menu. For operating the setting menu, refer to "Making Basic Settings" on page 32. 27