JVC DLA-G20U DLA-G20U User instruction manual (2.6MB) - Page 48
Changing Setting the Source
View all JVC DLA-G20U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Operating the Main Menu (Cont.) Changing (Setting) the Source ENGLISH s Remote control unit OPERATE COMPUTER VIDEO MENU/ENTER button VOL. PAGE BACK T ZOOM W FOCUS MENU/ENTER PRESET QUICK ALIGN. Cursor buttons AV MUTING PAGE BACK button sMain menu VIDEO CH: 1 NTSC(480i) PIXEL CLOCK POSITION PICTURE SOUND OPTIONS SOURCE CHANNEL USER SOURCE SETUP DISPLAY SIZE DECODER AUTO(NTSC(480i)) LANGUAGE ENGLISH Submenu item [SOURCE] Notes • The selected item is shown in magenta color. Items shown in gray color cannot be operated or set in the current mode. • Items that can be set are different when video signals are input and when computer signals are input. • For dedicated source signals (corresponding frequency, etc.) for computer signals, see page 19. Normally, use the source setting in AUTO. If use in AUTO is unstable such as color not appearing, the screen being disturbed or the screen being intermitted, set to the dedicated source (forced mode) in accordance with the input signal. Also, User Source mode, which lets you set up special signals, is available. • When shipped from the factory, the source settings are as follows: Input mode VIDEO Y/C YPBPR Factory setting NTSC(480i) NTSC(480i) AUTO Input mode COMP 1 COMP 2 - Factory setting AUTO AUTO - Notes • Depending on the signal from a device connected, adjustment may be needed after a dedicated source is set. If that is the case, adjust the appropriate items. • When the input mode (SOURCE) is VIDEO or Y/C, and if AUTO is set, the automatic detecting function may work, possibly causing the screen to be intermitted or disturbed. In that case, set to a dedicated source (forced mode). • When special effect playback (fast-forward/ twice-speed/triple-speed) is performed on a video deck, etc, the picture may be disturbed or intermitted, depending on the device. • When inputting 480p or 720p-DTV-format signal in COMP 2 input mode, use the dedicated source mode "SDTV(480p)" or "HDTV(720p)". (In AUTO, 480p or 720p signal can not be detected.) 1 Press the MENU/ENTER button. • The main menu appears on the screen. 2 Select a submenu item "SOURCE" using the cursor button 5 or ∞. • The SOURCE item (displayed in text) is indicated in magenta color. 3 Press the MENU/ENTER button. • The submenu, SOURCE menu, appears on the screen. SOURCE (SXGA1) AUTO NTSC(480i) SDTV(480p) HDTV(720p) HDTV(1080i) PAL/SECAM PC-98 VGA1 VGA3 MAC13 VGA VESA SVGA1 SVGA2 MAC16 XGA1 XGA2 MAC19 MAC21 SXGA1 SXGA2 SXGA3 USER (SOURCE menu) The display in ( ) shows the currently set status. 4 Select the item to set using the cursor buttons 5/∞ or 2/3. • The item to set is shown in magenta color. SOURCE (SXGA1) AUTO NTSC(480i) SDTV(480p) HDTV(720p) HDTV(1080i) PAL/SECAM PC-98 VGA1 VGA3 MAC13 VGA VESA SVGA1 SVGA2 MAC16 XGA1 XGA2 MAC19 MAC21 SXGA1 SXGA2 SXGA3 USER (To be continued on the next page) 47