JVC DLA-M4000LU DLA-M4000LU User instruction manual (1.1MB) - Page 25

Basic Operations s Projector's buttons STAND BY indicator OPERATE indicator TEMP STAND BY OPERATE LAMP EMERGENCY AV RGB 2, 1 OPERATE button 1, 2 MAIN POWER switch s Remote control unit QUICK ALIGN. OPERATE AV HIDE PRESET PAGE BACK MENU/ OPERATE button 2, 1 ENTER LENS LOCK UNLOCK AV RGB/COMPUTER U SHIFT D T ZOOM W LENS + FOCUS - The following describes the basic procedure for normal use of the projector. 1. Turning on the Power 1 Turn on the MAIN POWER switch of the projector. ON [ ƒ ]:The main power turns on and the STAND BY indicator comes on. Projector's indicator STAND BY 2 Press the OPERATE button for one second or more. (Or press the remote control's OPERATE button for one second or more.) • The OPERATE indicator comes on. • About 30 seconds after the MAIN POWER switch is turned on, you can start projecting. Remote control unit Projector OPERATE or Note OPERATE • After the power is turned on, the screen may be jumbled for a few seconds, but this is not a malfunction. s Turning off the Power 1 Press the OPERATE button for one second or more. (Or press the remote control's OPERATE button for one second or more.) • The STAND BY indicator changes to blinking, and the projector goes into cool-down mode. Example of the projector's button Projector \ OPERATE STAND BY 2 Turn off the MAIN POWER switch after the cooling fans have stopped running. OFF [‡]: The MAIN POWER switch turns off and the STAND BY indicator goes off. Projector STAND BY * Do not turn off the MAIN POWER switch during cool down mode (the STAND BY indicator blinking). About 10 minutes after the STAND BY indicator comes on steady (stand-by mode), the cooling fans (except the one for the light-source lamp power supply) will stop, and then turn off the MAIN POWER switch. 25