JVC DLA-M4000LU DLA-M4000LU User instruction manual (1.1MB) - Page 64

Specifications Optical mechanism system • Projection method 3D-ILA device, 1 lens, 3 primary color optical shutter method • D-ILA device 0.9" measured diagonally (1365 pixels ×1024 pixels) × 3 (Total number of pixels : 4,193,280) • Projecting lens GL-M4023SZ 3:1~7:1 zoom lens (separately available) GL-M4015S 1.5:1 fixed focus lens • Screen size 60" to 300" [recommended] to 600" [maximum] measured diagonally (*with aspect ratio : 4 : 3) • Light-source lamp 1.6 kW xenon lamp Electrical system • Color system • Resolution • Scanning frequency NTSC, NTSC 4.43, PAL, SECAM (* Automatic switching / manual switching) 1365 dots × 1024 dots (*S-XGA full resolution, during RGB input) 1000TV lines (*Horizontal resolution, aspect ratio 4 : 3, during video input) Horizontal frequency : 15 kHz ~ 82 kHz Vertical frequency : 50 Hz ~ 78 Hz Input / output [EXT. IN (AV IN input)] • Y/C * The Y/C (S-video) and VIDEO (composite video) signals can be input with the video board installed. 1-line, mini-DIN 4 pin × 1 (* With the video board, separately available, installed) Y (luminance signal) : 1V(p-p), 75Ω (negative sync) C (chroma signal) : 0.286V(p-p) (burst signal), 75Ω [NTSC] : 0.3V(p-p) (burst signal), 75Ω [PAL] • VIDEO 1-line, BNC × 1 (* With the video board, separately available, installed) Composite video signal : 1V(p-p), 75Ω (negative sync) • Y, PB/B-Y, PR/R-Y 1-line, BNC × 3 Component (Y,B-Y,R-Y) signals Y : 1V(p-p), 75Ω (negative sync or 3-value sync) PB/B-Y : 0.7V(p-p), 75Ω PR/R-Y : 0.7V(p-p), 75Ω DTV-format signals [480i (ITU-R BT. 601-4), 480p (SMPTE 293M)] Y : 1V(p-p), 75Ω (negative sync) PB, PR : 0.7V(p-p), 75Ω [720p (SMPTE 296M), 1080i (SMPTE 274M)] Y : 1V(p-p), 75Ω (3-value sync) PB, PR : 0.7V(p-p), 75Ω [RGB IN (RGB input)] • RGB IN-1 (PC) 1-line, D-sub 3-row 15 pin × 1 Analog RGB signal R : 0.7V(p-p), 75Ω B : 0.7V(p-p), 75Ω G : 0.7V(p-p), 75Ω G on Sync : 1V(p-p), 75Ω (negative sync) Sync signal : 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity) * Some connected devices may not correspond to composite sync (Cs) or G on sync signal. • RGB IN-2 1-line, BNC × 5 Analog RGB signal R : 0.7V(p-p), 75Ω B : 0.7V(p-p), 75Ω G : 0.7V(p-p), 75Ω G on sync : 1V(p-p), 75Ω (negative sync) 64