JVC GY-DV5000U DR-DV5000U DV Video Disk Recorder 44 page instruction manual - Page 11

FireStore DR-DV5000 User Guide If you are using a digital battery system that passes battery life status to the camcorder, and are using a camcorder that is compatible with these systems, connect the following cables between DR-DV5000 and camcorder: Anton/Bauer Digital Battery System - Grey and Orange Cable IDX Syncron Digital Battery System - Blue and Red Cable 5) Once mounted, secure the two captive screws at the base of DR-DV5000 to the camcorder. Ensure that no cables are "pinched" between the DR-DV5000 and the camcorder. 4) "Hook" the DR-DV5000 to the rear of the the GY-DV5000 camcorder. If you are using a JVC GY-DV5000 camcorder, use care to ensure that the 52-pin connector on DRDV5000 mounts properly to the equivalent connector on your camcorder. Harness any loose cables into the "Hidey-Hole" on the DRDV5000. 6) Re-attach the battery system to the rear of the DR-DV5000. Ensure to connect all power cables and utilize the supplied gasket between DR-DV5000 and the battery system. Harness any loose cables in the "Hidey-Hole" on the rear of DR-DV5000. PAGE 10