JVC GY-DV5000U DR-DV5000U DV Video Disk Recorder 44 page instruction manual - Page 24
Syncro Slaved, Series Record Mode - dv camcorder a
View all JVC GY-DV5000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
AV/C AV/C is utilized in PLAYBACK and other situations where DR-DV5000 is controlled by an external FireWire device (such as a DV NLE system), connected to the "DV I/O port on DR-DV5000. NOTE: AV/C is NOT for use in DR-DV5000 RECORD MODES. Syncro Slaved In SYNCRO SLAVED mode, the camcorder and DR-DV5000 share the same REC trigger and DR-DV5000 is slaved to the camcorder. Once set and the user exits the CONTROL MENU, they will return to the default splash screen. DR-DV5000 also immediately enters REC PAUSE mode and a "Y" appears next to the record symbol on the camcorder viewfinder and LCD (GY-DV5000 series only) as well as the DR-DV5000 LCD. All triggers of REC and REC PAUSE are controlled by the camcorder exclusively. Every time the camcorder REC button is pressed, DR-DV5000 goes into the particular RECORD MODE that is selected. When pressed a second time, DR-DV5000 goes into REC PAUSE. Another press of the REC button on the camcorder again starts the particular RECORD MODE that is selected. At this point, a new track is created on disk. Timecode generated by the camcorder is recorded to the file when DR-DV5000 is set to EXT TC mode. FireStore DR-DV5000 User Guide The DR-DV5000 buttons (other than MENU, DISP and SHFT) are locked out when in this mode, as is wired or infrared remote control units. If in VTR mode on the camcorder, all keys work. The user is only able to exit SYNCRO SLAVE by entering the CONTROL MENU which they can do directly by pressing the MENU button when on the DR-DV5000 default splash screen. If the camcorder is set to VTR mode, DR-DV5000's control panel becomes active in order to allow playback. If a tape ends while using SYNCRO SLAVE mode, DR-DV5000 will continue to record. To STOP a recording, eject the tape in the transport and then it is possible to continue REC and REC/PAUSE functions on DRDV5000 with the camcorder's VTR button and the camcorder is set to REGEN or PRST/REC. NOTE: If DR-DV5000 is set to EXT TC when in SYNCRO SLAVE mode, EXT TC will stop once the tape in GY-DV5000 ends. Use a different TC mode when using SYNCRO SLAVE. Series Record Mode When used with RETRO DISK or RETRO CACHE modes, as soon as SYNCRO SLAVE is set, the camcorder begins recording to disk. A press of the REC trigger on the camcorder kicks DR-DV5000 out of RETRO DISK or RETRO CACHE and goes into standard REC. When the camcorder is triggered back into REC PAUSE mode, DR-DV5000 once again goes into RETRO DISK or RECORD CACHE mode again. SERIES RECORD will start recording to disk automatically when a tape is close to the end of a record session. Once recording to disk has started, REC will continue until stop is pressed on DR-DV5000. PAGE 23