JVC RMP-2580U RM-P2580 Dome Controller Instructions (1148KB) - Page 15

2. BASIC OPERATIONS AUTO PATROL OPERATION The AUTO PATROL operation consists of high-speed camera movement between multiple pre-set positions, in a sequence and at time intervals set by the user. This function can be set on individual cameras. POSITION display 1. REMOTE CONTROL UNIT RM-P2580 CAMERA POSITION SETUP POWER POWER SET MENU ALARM KEY LOCK AUTO F-1 F-2 F-3 Press the AUTO PATROL button. The LED indicator lights up and the AUTO PATROL operation starts. The POSITION display shows "AP" at this time. NOTE During the AUTO PATROL operation, the manual operation is not available. To stop the AUTO PATROL operation, press the AUTO PATROL button again. NOTES ● The AUTO PATROL operation also stops when a preset position is selected or the AUTO PAN operation is started. REF. : [POSITION SELECTION] on Page 11 and [AUTO PAN OPERATION] on page 14. ● The AUTO PAN operation is set on the CAMERA SCREEN ( REF. : Page 28). Open the camera menu screen to perform the setting. As the rest of the setting procedure is variable depending on the camera models, please refer to the instruction manual of the connected cameras. LENS SPEED CAMERA/POSITION PAN/TILT POSITION 1 OPEN 2 5 8 0 /HOME 3 6 9 ENTER 2. CAMERA CLOSE IRIS 4 7 CLEAR OPTION 1 OPTION 2 NEAR FOCUS AF FAR AUTO PAN AUTO PATROL WIDE ZOOM TELE AUTO PATROL button 15