JVC VN-X235VPU Instruction Manual - Page 17
Basic Settings1, VN- V225U series is displayed
View all JVC VN-X235VPU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Basic Settings1 This page is for performing basic setting related to the network. This page can be used during access using AadminB. ● Click [Basic Settings1]. ● Press the [OK] button to enable the new settings. ● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value. Click A B C D E F Memo: ● You can open the [Basic Settings1] screen without going through the built-in viewer by entering the following URL address ( contains model name) in the address field of Internet Explorer. ● Enter the model name in lowercase letters. Network A IP Setting B IP Address C Subnet Mask D Default Gateway Time E Time F Time Zone G PC Time to Camera For setting the DHCP client function. Connect camera to a network environment with a DHCP server when DHCP is to be enabled. If the DHCP server does not exist when [IP Setting] is set to ADHCP EnableB, camera will start running with the 192.168.0.2 IP address and 255.255.255.0 subnet mask in about 2 minutes after startup. (A Page 6) For setting the IP address of camera. For setting the subnet mask of camera. For setting the default gateway of camera. Enter 0.0.0.0 if you do not want to set a default gateway. Displays the clock time of camera. The time transmitted by camera is recorded in the JPEG header. Discontinuity may occur in the JPEG header's time immediately before and after changing the time. For setting the time zone. Click the [Set] button to set the time of the computer on camera. 17