JVC VN-X235VPU Instruction Manual - Page 23
TG TH TI TJ, Set values: Off, Mid, High, Super]
View all JVC VN-X235VPU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
(TV) is applicable to VN-V series only. (TX) is applicable to VN-X series only. G Color Level H AGC For adjusting the color level. Larger value : Increases the color level. Smaller value : Decreases the color level. [Setting values: -5 to 0 to 5] For setting the AGC (automatic gain control) level. Off : Disables the AGC feature Mid : When the amount of light is insufficient High : When the amount of light is particularly insufficient Super : When the brightness level is insufficient even upon setting to High. [Set values: Off, Mid, High, Super] Memo: ● This feature cannot be configured when the L Easy Day/Night feature is set to ABlack and WhiteB or AAutoB. ● The AGC cannot be set when the L "B&W Mode" is set to "Black and White" or "Auto Low, Auto Mid or Auto High". ● The screen appears grainy at dark locations when the AGC feature is in use. I Sense Up This feature is used to raise the sensitivity level by lengthening the exposure time. You can specify the number of times by which the sensitivity level is to be increased automatically when the object becomes dark. When Ax16B is selected, the sensitivity level will automatically increases continuously until it is 16 times of the level when AOffB is selected. When the sensitivity level increases, the shutter speed slows down and motion becomes unnatural. When set to AOffB, [Sense Up] is disabled. [Set values: Off, x2(1/15s), x4(1/7.5s), x8(1/3.75s), x16(0.5s), x32(1.1s),x62(2.1s)] (TV) [Set values: Off, x2(1/7.5s), x4(1/3.75s), x8(0.5s), x16(1.1s), x22(1.5s)] (TX) Memo: ● Upon raising the sensitivity level, the screen may appear grainy or white, or white defects may occur. However, this is not a malfunction. ● When Sense Up is set to a value other than AOffB, flickers occur under the light of fluorescent or mercury lamps. This is not a malfunction of the camera, but is due to principles related to Sense Up. ● When the shutter is set to a value between 1/250 to 1/10000, set Sense Up to AOffB. J ALC Priority For setting the priority of ALC (feature for maintaining the video level according to the brightness of the object). You can select whether to assign priority to the motion or picture quality when the object becomes dark. Motion : Assigns priority to motion. When the object becomes dark, priority is given to AGC (automatic gain control), and therefore this is suitable for shooting fast-moving objects. Quality : Assigns priority to picture quality. When the object becomes dark, priority is given to the Sense Up feature, and therefore this is suitable for shooting objects requiring a high picture quality. [Set values: Motion, Quality] 23