JVC VN-X235VPU Instruction Manual - Page 69
Set values : Color, Black and White, Auto Low, Auto Mid, Auto High ], Auto]
View all JVC VN-X235VPU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
(TV) is applicable to VN-V series only. (TX) is applicable to VN-X series only. BBack Light Compensation For selecting the backlight compensation feature. Set this feature when there is a bright light source in the same direction as the object. Enables unwanted light sources to be excluded from the photometry area. Mode Off : Disables backlight compensation. Area1 to 4 : For selecting a photometry area from the four available types. Photometry Photometry Photometry Photometry Photometry Area Area Area Area Area Off Area1 Area2 Area3 Area4 Memo: ● The backlight compensation area is not linked to digital PTZ (TX). [Set values: Off, Area1, Area2, Area3, Area4] B Easy Day and Night For specifying Easy Day and Night. VN-V25U, VN-X35U only Mode Color : Sets to the color mode at all times. Black and White : Sets to the black-and-white mode at all times. Auto : Image color switches to black-and-white when the luminance level is low. Memo: ● The threshold of the Auto switching cannot be changed. CB&W Mode VN-V26U, VN-V225U series, VN-X235U series only [Set values : Color , Black and White, Auto] For specifying whether to switch the image to the B&W mode. Auto mode can be specified for switching automatically to the Black and White mode when the luminance level is low. In auto mode one of three levels can be selected according to the luminance level. Mode Color : Switches to the color mode at all times. Black and White : Switches to the black-and-white mode at all times. Auto Low : Switches to the black-and-white mode when the luminance of the signal level of the object is low. Auto Mid : Switches to the black-and-white mode when the luminance of the signal level of the object is medium. Auto High : Switches to the black-and-white mode when the luminance of the signal level of the object is high. [Set values : Color, Black and White, Auto Low, Auto Mid,Auto High ] Memo: ● The infrared filter engages and disengages when switching between modes, which causes mechanism noise. ● During the occurrence of mechanism noise, the distribution sound from the camera will be muted. (VN-V26U only) ● When AAuto LowB, AAuto MidB or AAuto HighB has been selected the camera will change the mode immediately according to the luminance level. C Focus Assist Mode If [Execute] button is clicked, [Current State] will change to [Focus Assist] and focus assist mode is enabled. If [Stop] button is clicked, [Current State] will change to [Normal] and focus assist mode is disabled. Memo: ● Focus assist mode will be disabled after 3 minutes if left unattended. 69