JVC VN-X235VPU Instruction Manual - Page 54
Maintenance Restart, All Settings, Update
View all JVC VN-X235VPU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Setting Using Internet Explorer Setting (continued) Maintenance Page This page is for maintenance purposes. This page can be used during access using AadminB. ● Click [Advanced Settings] to display setting menu. ● Click . A B C Click A Restart B All Settings AInitializeB C Update Restarts the camera. (It takes about one minute for the camera to restart.) Restores all settings to their default values and reboots the unit. (It takes about one minute for the camera to initialize and reboot.) Passwords will also be initialized. The built-in clock of the camera will not be affected. JPEG/MPEG4 transmission and all others services that are running will be discontinued. Upgrades the firmware version of the camera and reboots the unit. The settings of the camera will be saved. Copy the new firmware file to the computer on which Internet Explorer is used, and specify this file using the [Browse...] button. Press the [Update] button to start the update. JPEG/ MPEG4 transmission and all others services that are running will be discontinued. The update process may take several minutes. A message will be displayed on the Internet Explorer when update is successfully completed. Note: ● Do not turn off the power when update is in progress or during reboot after update is complete. Turning off the power of the camera may cause it to malfunction. ● Before update, end the accesses to the camera from pages other than this page (Built-in Viewer etc). If update is started while accesses other than this page are valid, access to this page might be cut off. In that case, end the accesses other than this page, access to this page again to redo the update. 54