JVC VN-X235VPU Instruction Manual - Page 47

Protocol Protocol Settings, VSIP Protocol, VSIP Server Port, AMX Device, Discovery, Protocol

Get JVC VN-X235VPU - Network Camera - Pan PDF manuals and user guides View all JVC VN-X235VPU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Protocol Page This page is for changing the HTTP server port number. This page can be used during access using AadminB. ● Click [Advanced Settings] to display setting menu. ● Click . ● Press the [OK] button to enable the new settings. ● After changing, you will need to re-establish the connection if you are using the Internet Explorer. A B C D E Click Protocol Settings A HTTP Server Port B VSIP Protocol C VSIP Server Port D AMX Device Discovery Protocol For setting the protocols. You can change the port number for the built-in web server of the camera. (1 to 65535: The default port number setting is 80.) The JPEG and MPEG4 HTTP port number for the web server will also be changed. During access to the camera from the Internet Explorer, enter the following in the Internet Explorer when the camera is in its default settings. http://192.168.0.2 If the port number is changed to 8080, for example, enter the Internet Explorer as follows. http://192.168.0.2:8080 For setting VSIP to On/Off. Set to AOnB if you want to use this unit from Verint's Nextiva products. For changing the built-in VSIP number of the camera. (1 to 65535: Default value is 5510) For setting AMX Device Discovery Protocol to On or Off. Set to AOnB when you are using the camera on AMX's systems. [Set values : On, Off] JPEG Streaming E Priority For selecting the priority for distributing JPEG images. For selecting whether to assign priority to the number of clients or frame rate for distributing JPEG images. client number : Assigns priority to number of clients for distribution. (A Page 4) When the distribution request increases, the frame rate for JPEG distribution is reduced to enable distributions up to 20, the maximum clients. frame rate : Assigns priority to frame rate. (A Page 4) Set to this mode if you wish to maintain the JPEG frame rate as requested by the clients. When a distribution request that exceeds the maximum number of distributions is received, this request is denied. Memo: ● If the built-in viewer is used for playback, change the HTTP port number in the setting screen of the built-in viewer to the same value. 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
47
Protocol Page
This page is for changing the HTTP server port number.
This page can be used during access using
A
admin
B
.
●
Click [Advanced Settings] to display setting menu.
●
Click
[
Protocol
]
.
●
Press the [OK] button to enable the new settings.
●
After changing, you will need to re-establish the connection if you are using the Internet Explorer.
Memo:
●
If the built-in viewer is used for playback, change the HTTP port number in the setting screen of the
built-in viewer to the same value.
A
B
C
D
E
Click
Protocol Settings
For setting the protocols.
A
HTTP Server Port
You can change the port number for the built-in web server of the camera.
(1 to 65535: The default port number setting is 80.)
The JPEG and MPEG4 HTTP port number for the web server will also be
changed. During access to the camera from the Internet Explorer, enter
the following in the Internet Explorer when the camera is in its default
settings.
If the port number is changed to 8080, for example, enter the Internet
Explorer as follows.
B
VSIP Protocol
For setting VSIP to On/Off.
Set to
A
On
B
if you want to use this unit from Verint's Nextiva products.
C
VSIP Server Port
For changing the built-in VSIP number of the camera.
(1 to 65535: Default value is 5510)
D
AMX Device
Discovery
Protocol
For setting AMX Device Discovery Protocol to On or Off.
Set to
A
On
B
when you are using the camera on AMX's systems.
[Set values : On, Off]
JPEG Streaming
For selecting the priority for distributing JPEG images.
E
Priority
For selecting whether to assign priority to the number of clients or frame
rate for distributing JPEG images.
client number
: Assigns priority to number of clients for distribution.
(
A
Page 4)
When the distribution request increases, the frame rate
for JPEG distribution is reduced to enable distributions
up to 20, the maximum clients.
frame rate
: Assigns priority to frame rate. (
A
Page 4)
Set to this mode if you wish to maintain the JPEG frame
rate as requested by the clients. When a distribution
request that exceeds the maximum number of
distributions is received, this request is denied.