JVC VN-X235VPU Instruction Manual - Page 22
Set values: Custom, LCD1, CRT], High]
View all JVC VN-X235VPU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Setting Using Internet Explorer Setting (continued) (TV) is applicable to VN-V series only. (TX) is applicable to VN-X series only. A Camera ID B Monitor Type Character strings entered here will be written to the JPEG comment segment (item name: camera). Refer to the API Guide on the file formats of JPEG. For selecting the monitor type according to the monitor used to display the video images. The picture quality varies according to the type of monitor selected. Custom : Enables setting of picture quality according to the user's preference. LCD1, LCD2 : Picture quality setting for LCD monitors. Two types are available for selection according to the user's preference. CRT : Picture quality setting for CRT (cathode-ray tube) monitors. [Set values: Custom, LCD1, LCD2, CRT] Memo: ● Select ACustomB if you want to set the Gamma and Enhance frequency values. C Black Level For adjusting the black level. Lowering the value darkens the video image. Increasing the value brightens the image. [Setting range: 0 to 2] Memo: ● If the black level is set to "0", this may be too low depending on the monitoring device, or dark area will become complete black. ● When using MPEG4 images, set to either "1" or "2". D Gamma To alter the appearance of dark areas in a video image, adjust the gamma curve. Off : Do not perform gamma correction. The entire image appears dull. -3 to 3 : Perform gamma correction. When this is set to "0", standard gamma correction is performed. Setting to a smaller value darkens the image, while increasing the value brightens the image. [Set values: Off, -3 to 0 to 3] Memo: ● The set value is fixed when the monitor type is set to ALCD1B, ALCD2B, or ACRTB. E Enhance Frequency For setting the type of edge enhancement. Low : Enhances both thick and thin edges. High : Enhances thin edges. [Set values: Low, High] Memo: ● The set value is fixed when the monitor type is set to ALCD1B, ALCD2B, or ACRTB. F Enhance Level For setting the intensity of edge enhancement. Larger value : Increases the intensity of edge enhancement. Smaller value : Decreases the intensity of edge enhancement. [Setting values: -5 to 0 to 5] 22