JVC VN-X235VPU Instruction Manual - Page 52
Time NTP Server, Access Interval, Time Zone, Pc time to, Camera
View all JVC VN-X235VPU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Setting Using Internet Explorer Setting (continued) Time Page This page is for setting time. This page can be used during access using AadminB. ● Click [Advanced Settings] to display setting menu. ● Click . ● Press the [OK] button to enable the new settings. ● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value. A B C D E F Click A SNTP B NTP Server C Access Interval D Time E Time Zone F Pc time to Camera 52 For setting the SNTP client feature. When this is set to AOnB, the system accesses the specified NTP server at regular intervals to acquire the time. In addition, time will be recorded in the JPEG headers distributed by the camera. Discontinuity in JPEG header's time may occur immediately before and after acquiring time from the NTP server. For setting the IP address of the NTP server. For setting the time interval for access to the NTP server. Displays the time on the clock of the camera. The clock time can be changed by entering an appropriate value. (Second value cannot be specified.) In addition, time will be recorded in the JPEG headers distributed by the camera. Discontinuity may occur in the JPEG header's time immediately before and after changing the time. For setting the time zone. Click [Set] to load the clock time of the computer in use on the camera.