JVC VN-X235VPU Instruction Manual - Page 38
PTZ Set values : Moment, Low, Mid, High]
View all JVC VN-X235VPU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Setting Using Internet Explorer Setting (continued) PTZ Page (VN-X series only) Set the movement for AAuto ReturnB, AZoom LimitB and APreset PositionB. This page can be used during access using AadminB or AoperatorB. ● First of all, configure the encoding settings. (A Page 19) ● Click [Advanced Settings] to display setting menu. ● Click . ● Press the [OK] button to enable the new settings. ● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value. Note: ● This feature does not work for some combinations of distribution sizes on the Encoding page. (A Page 19) Click A B C A Auto Return Mode Return Time Test B Limit Zoom Limit C Preset Position Speed Speed Restores automatically to the state specified under [Mode] when action is not performed on the manually operated camera over the interval specified in [Return Time]. For setting the action after Auto Return. None : Auto Return disabled. HOME : Returns to the home position. Auto Patrol : Restores the auto patrol action. For setting the time interval before restoring the action via Auto return. [Set values : 1 minute, 2 minutes, 3 minutes, 5 minutes, 10 minutes, 20 minutes, 30 minutes, 60 minutes] Click [Execute] to perform a test execution of the preset Auto Return action. Set maximum value of electronic zoom feature. [Set values : 1 , 2 , 4 , 8 ] For adjusting the speed of movement to the Preset Position. This is also applicable to movement to the Preset Position in the Auto Patrol mode. [Set values : Moment, Low, Mid, High] 38