JVC VN-X235VPU Instruction Manual - Page 7
IP address setting at the computer, Windows Vista
View all JVC VN-X235VPU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
IP address setting at the computer Set the computer to an IP address that enables communication with the camera. Procedures described in this item are intended for Windows XP users. 1. Click [Start] ● Select in the sequence of [Control Panel]-[Network Connection]-[Local Area]. Windows Vista : ● Select in the sequence of [Settings]-[Control Panel]-[Network and Sharing Center]-[Manage network connections]. 2. The computer on which Internet Explorer is launched automatically selects the connected network ● Right-click and select [Properties]. ● Check to ensure that the [Client for Microsoft Networks] and [Internet Protocol(TCP/IP)] check boxes are selected. Windows Vista : ● Check to ensure that the [Microsoft Network Client] and [Internet Protocol Version 4 (TCP/IPv4)] checkboxes are selected. 3. Select [Internet Protocol(TCP/IP)] and click [Properties] Windows VistaɿSelect [Internet Protocol Version 4 (TCP/IPv4)], and click [Properties] 4. Set the IP address A Select [Use the following IP address]. B Specify the [IP address]. (For example, use 192.168.0.100) Memo: Make sure that you take note of the original IP address before altering. Note: Ensure that a duplicate IP address is not specified within the same network environment. C Set [Subnet Mask] to a value that is appropriate for the setting operation. Consult the network administrator if you have any queries. (Use 255.255.255.0 when the camera is in its default settings.) D When a [Default Gateway] is present, make use of the corresponding IP address (e.g., 192.168.0.254). E Click 5. Click [OK] on the ALocal Area Connection PropertiesB screen 7