Kenwood DNX6180 dnx7180 (pdf) - Page 85
Controlling General Audio, DSP select - bypass
UPC - 019048192714
View all Kenwood DNX6180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Return to the Top page Audio Setting Up Car type adjust You can manually set the sound output timing of each channel. 1 In the Car Type screen, touch [Adjust]. Car Type Adjust screen appears. 2 Touch the speaker you wish to adjust and set a delay time using [2] and [3] or slider bar. DSP select You can select whether using DSP (Digital Signal Processor) System. 1 Touch [Bypass] or [Through] of [DSP Select] in the Audio SETUP screen. NOTE • Make fine adjustment of the delay time of the speaker output specified here to have a more suitable environment for your vehicle. • The settings of the delay time are automatically identified and compensated by specifying the distances of each speaker from the center of the vehicle interior. 1 Set the front and rear positions and the height of the reference point to the position of the ears of the person sitting in the front seat, and set the right and left positions to the center of the vehicle interior. 2 Measure the distances from the reference point to the speakers. 3 Calculate the distance difference in accordance with the farthest speaker. Bypass There is no effect by DSP. Through There is an effect by DSP. NOTE • When the mode is set to [Bypass], DSP System cannot be adjusted. Controlling General Audio 1 Touch [Audio Control]. +3.4feet 1.6feet 2.5feet 5feet +2.5feet +0feet 84