Kenwood DNX6180 dnx7180 (pdf) - Page 86
Equalizer Control, operation - user manual
UPC - 019048192714
View all Kenwood DNX6180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
2 Set each item as follows. Return to the Top page Audio Setting Up Equalizer Control You can adjust equalizer by selecting the optimized setting for each category. If you use , you can also adjust equalizer manually. 1 Touch [Equalizer]. Fader #/Balance # Adjust the volume balance around the touched area. [2] and [3] adjust the right and left volume balance. [5] and [∞] adjust the front and rear volume balance. Volume Offset* Finely adjust the volume of the current source to minimize the difference in volume between different sources. Subwoofer Level Adjusts the subwoofer volume. This setting is not available when subwoofer is set to "None". See Speaker setup (P.81). Bass Boost Sets the amount of bass boost among "OFF"/ "Step1"/ "Step2". Loudness Turns the loudness control function on or off. If turned on, high and low tones are automatically enhanced during low volume. Settable only when zone function (P.87) is set to off. * If you have increased the volume first, then reduced the volume using the "Volume Offset", the sound generated if you suddenly switch to another source may be extremely loud. Equalizer screen appears. operation Controlling EQ curves 1 Select EQ curve from [Natural], [Rock], [Pops], [Easy], [Top40], [Jazz], [Game], [iPod], and [User]. NOTE • [iPod] is available only during iPod source. 85