Kenwood DNX6180 dnx7180 (pdf) - Page 87
operation, Controlling equalizer manually, Controlling EQ curves, Controlling SystemQ-Ex
UPC - 019048192714
View all Kenwood DNX6180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Return to the Top page Audio Setting Up Controlling equalizer manually This setting cannot be performed when you select [iPod] in the Equalizer screen. 1 Touch [EQ] in the Equalizer screen. 2 Touch the screen and set the Graphic Equalizer as desired. operation Controlling EQ curves 1 Select EQ curve from [Natural], [Rock], [Pops], [Easy], [Top40], [Jazz], and [User] using [2] and [3]. Gain level (light green boxed area) Adjust the gain level by touching the each frequency bar. Touching [2], [3], [5] and [∞] can also adjust the level. Use [2] and [3] to select a frequency, and [5] and [∞] to set the level. EQ INIT Returns to the previous level which the gain level is adjusted. Flat Tone curve becomes flat. Bass EXT (Bass Extend Settings) When turned on, the frequency lower than 62.5 Hz is set to the same gain level as 62.5 Hz. SW Level Adjusts the subwoofer volume. This setting is not available when subwoofer is set to "None". See Speaker setup (P.81). Controlling SystemQ-Ex Selects items to be adjusted for tone curve setup. If you turn off this setting, only Level can be set up for tone curves. 1 Touch [ON] or [OFF] of [SystemQ-Ex]. 86