Kodak 8536096 User Guide - Page 17

Preparing your EasyShare digital camera Refreshing the Ni-MH rechargeable battery pack If you are getting fewer than 20 pictures per charge with your Ni-MH rechargeable battery pack, follow the tips under Extending battery life, page 9. If these don't help, the battery pack needs to be refreshed. The refresh cycle completely discharges the battery pack, then fully recharges it. NOTE: A full refresh cycle can take up to 8 hours, depending on how much charge is left in your battery pack. For best results, refresh the battery pack overnight; do not interrupt the discharge/recharge cycle. 1 Make sure the Ni-MH rechargeable battery pack is in the camera. 2 Place the camera in the printer dock (see page 10). 3 Press and hold the Battery charging lights/Refresh button, , until the Battery charging lights begin flashing green (approximately 5 seconds). The charging lights monitor the refresh status: Descending blinking green lights Discharging battery pack (lights turn off as discharging progresses). Ascending steady green Charging battery pack (lights turn on as charging lights progresses). Charging is complete when all three lights are lit. NOTE: Refreshing only works with the Kodak EasyShare Ni-MH rechargeable battery pack. www.kodak.com/go/support 11