Konica Minolta bizhub 181 bizhub 181Copy/Fax/Print/Scan Operation User Manual - Page 26
Loading the bypass tray, be loaded with one sheet of paper at a time.
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Loading the bypass tray Paper can be fed manually through the bypass tray when you wish to print onto paper of a size that is not loaded into a paper drawer, or when you wish to print onto label sheets or other special paper. This machine is equipped with a multi bypass tray, which can be loaded with up to 100 sheets of plain paper, and a manual bypass tray, which can only be loaded with one sheet of paper at a time. Follow the procedure described below to load paper into the two bypass trays. 1 Load the paper into the tray. - Load the paper so that the side to be printed on faces down. - Do not load so many pages that the top of the stack is higher than the , mark. bizhub 181 x-25
bizhub 181
x-25
Loading the bypass tray
Paper can be fed manually through the bypass tray when you wish to print
onto paper of a size that is not loaded into a paper drawer, or when you wish
to print onto label sheets or other special paper.
This machine is equipped with a multi bypass tray, which can be loaded with
up to 100 sheets of plain paper, and a manual bypass tray, which can only
be loaded with one sheet of paper at a time.
Follow the procedure described below to load paper into the two bypass
trays.
1
Load the paper into the tray.
–
Load the paper so that the side to be printed on faces down.
–
Do not load so many pages that the top of the stack is higher than
the
,
mark.