Konica Minolta bizhub 181 bizhub 181Copy/Fax/Print/Scan Operation User Manual - Page 85

Using the machine as a fax machine Chapter 2 2 Using the machine as a fax machine 2.8 Transmission errors and remedies Check the following if the fax cannot be sent or a fax cannot be received. Faxes cannot be sent Symptom Possible cause Remedy The document cannot be scanned. Is the document too thick? Position the document on the original glass to send it. Is the document tool thin or too small? Position the document on the original glass to send it. Is the original glass dirty? Wipe the original glass with a soft, dry cloth. The document was scanned at an angle. Were the document guides Adjust the document guides correctly adjusted to the width for the size of the document. of the document? The fax received by the recip- Is the document incorrectly ient is not clear. positioned? Position the document correctly. Is the original glass dirty? Wipe the original glass with a soft, dry cloth. Is the text in the document too Adjust the scanning density. faint? Is there a problem with the re- Check that this machine can cipient's fax machine? make clean copies. If it can, try sending the fax again. The fax received by the recipient is blank. The document was sent with the front side facing down (when using the document feeder). Load the document with the front side facing up, and then try sending the fax again. Faxes cannot be sent automatically. Was the fax number incorrect? Check the fax number. Is a number specifically for tel- Check the fax number. ephone calls being dialed? Is there a problem with the recipient's fax machine (it is out of paper, it is not set to receive faxes automatically, it is turned off, etc.)? Have the recipient check their fax machine. 2-18 bizhub 181