Konica Minolta magicolor 4750EN/4750DN magicolor 4750EN/magicolor 4750DN User - Page 230

Solving Problems with Media Misfeeds " Frequent misfeeds in any area indicate that area should be checked, repaired, or cleaned. Repeated misfeeds may also happen if you're using unsupported print media. Symptom Cause Solution Several sheets go through the printer together. The front edges of the media are not even. The media is moist from humidity. Remove the media and even up the front edges, then reload it. Remove the moist media and replace it with new, dry media. Media misfeed message stays on. Right side cover needs to be opened and closed again to reset the printer. Open and close the right side cover of the printer again. Some media remains Recheck the media path and make misfed in the printer. sure that you have removed all of the misfed media. Duplex misfeeds. Unsupported media (wrong size, thickness, type, etc.) is being used. Use KONICA MINOLTA-approved media. See "Media Specifications" on page 6-2. Only plain paper, special paper and thick stock, 60-210 g/m2 (16-55.9 lb) can be autoduplexed. See "Media Specifications" on page 6-2. Make sure that you have not mixed media types in Tray 1 or 2. Do not duplex (double-sided) envelopes, labels, letterhead, postcards, glossy or single side only paper. Media is still being misfed. Recheck the media path inside the duplex option and make sure that you have removed all of the misfed media. Solving Problems with Media Misfeeds 9-23