Konica Minolta magicolor 4750EN/4750DN magicolor 4750EN/magicolor 4750DN User - Page 236

Symptom Cause Solution Media is wrinkled. The media is moist Remove the moist media and replace it from humidity or hav- with new, dry media. ing water spilled on it. The transfer roller or Check them for damage. If necessary, fuser unit is defective. contact Technical Support with the error information. Unsupported media (wrong size, thickness, type, etc.) is being used. Use KONICA MINOLTA-approved media. See "Media Specifications" on page 6-2. The date and The backup battery time is not has reached the end correctly of its life. maintained on the printer. Replace the backup battery. For details, see "Replacing the Backup Battery" on page 7-33. The pages There are large curls Remove the paper from the paper tray, that were fed in the paper. turn it over, and then load it again. out were not There are gaps uniformly between the media loaded. guides of the paper Slide the media guides of the paper tray against the sides of the paper so that there are no gaps. tray and the sides of the paper. The hard The hard disk was disk was full. automatically formatted. When the control panel displays HDD NEAR FULL, delete print jobs and resources (fonts, forms, etc.) which were saved on the hard disk using Download Manager or PageScope Web Connection. The Com- The CompactFlash pactFlash card was full. card was automatically formatted. When the control panel displays MEMORY CARD NEAR FULL, delete resources (fonts, forms, etc.) which were saved on the memory card using Download Manager or PageScope Web Connection. Solving Other Problems 9-29