Kyocera KM-1650 1650/2050/2550 Operation Guide Rev-4 (Basic) - Page 110
Displayed Messages
View all Kyocera KM-1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Troubleshooting Displayed Messages When any of the following message appear on the message display, take the indicated action. Message Procedure Reference page Close ## cover. The indicated cover is open. - Close all the covers securely. Add paper in cassette. Paper has run out. 2-1 [Place paper in P cassette.] Add paper. Add paper in cassette. ## size (###) Print data does not match the size or type of paper in the cassette. - Replace the paper. • To change the paper source, press the Paper Select key to select the desired paper source and press the Enter key. • If you press the Printer key, the following messages are displayed. GO: Prints onto the currently selected paper. CANCEL: Stops printing. Press the S key or the T key to select the desired processing and press the Enter key. Set cassette. The cassette is not closed securely. - [Close paper cassette.] First pull it out and push it all the way back in. Check paper size. There is no paper loaded of a size that can be used in the currently - selected mode. Check the paper. Reposition original or The orientations of the original and the selected paper are different. - change cassette. Change the orientation of the original. If you press the Start key [Reposition original or without changing the orientation, copying will be performed at a select other paper cassette.] 100 % (1:1) magnification ratio. Exceed copy limit. Unable to copy The number of copies made with your management code has Refer to reached the limit that was set in the department management mode Chapter 4 in and copying is no longer possible with that code. Advanced Use the department management mode to clear the copy count. Operation Guide Set toner container. The toner container is not set properly. 5-5 Set the toner container properly. Ready to copy. Add toner Toner remaining in the machine is low. It is possible to copy only one 5-5 by one. Replace the toner container as soon as possible. Unable to copy. No toner remains. 5-5 Please Add Toner Replace the toner container to add toner. [Cannot copy. Add toner, resume copying.] Replace Waste Toner Box The waste toner box is full. 5-5 Replace the waste toner box with a new one. Clean the slit glass for The slit glass is dirty. 5-2 original fed from DP. Clean the slit glass because black lines may be copied when the [Clean the slit glass optional document processor is used. original fed from DP.] 6-4