Kyocera KM-1650 1650/2050/2550 Operation Guide Rev-4 (Basic) - Page 67
Saddle Stitch Direction, Left side, Top side
View all Kyocera KM-1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
4 Press the Enter key. If you have selected 1 sided->2 sided [1-sided->2-sided], proceed to the next step. If you have selected 2 sided->2 sided [2-sided->2-sided] or Book->2-sided, proceed to step 7. Basic Operation 5 Press the S key or the T key to select the desired finished stitch side. Saddle Stitch Direction: Left side Top side 6 Press the Enter key. 7 Press the Start key. Scanning of the original starts. If the originals have been set in the optional document processor, copying starts automatically. If the original has been set on the platen, a message prompting replacement of the original is displayed. In this case, proceed to the next step. 8 Replace the original and press the Start key. Scanning of the original starts. 9 If no original remains, press the Enter key. Copying starts. 3-11