LG LREL6321S Owners Manual - Page 18

Engaging the Anti-tip Device, Test Run

Get LG LREL6321S PDF manuals and user guides View all LG LREL6321S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

18 INSTALLATION Engaging the Anti-tip Device •• Move the range close enough to the opening to plug into the receptacle. •• Slide the range into position ensuring that the back leg slides under the anti-tip bracket. The range should sit flush against the back wall when properly installed. •• Carefully attempt to tip the range forward to ensure that the anti-tip bracket is engaged properly. If properly installed, the anti-tip bracket will prevent the range from being tipped. If the range can be tipped, reinstall the range until the anti-tip bracket is properly installed and the range will not tip forward. •• Turn on electrical power. Check the range for proper operation. Test Run Check if the range is properly installed and run a test cycle. 1 Before using the cooktop for the first time, clean it with a ceramic cooktop cleaner. This helps protect the top and makes cleanup easier. 2 Press Clear/Off to start test. 3 Turn on each burner to the Hi setting to check that the surface heating elements are working properly. The elements should glow red and radiate heat, and they should cycle on and off periodically even when the setting is in the Hi position. This cycling prevents the glass-ceramic from being cracked by thermal shock. IMPORTANT : The warming zone does not consume enough power to glow red. 4 After checking all the surface heating elements, check the locking system by pressing Clear/Off for three seconds. The oven door should lock. Press Clear/Off for three seconds to disable Lockout. The Lockout function should disable controls for the oven. 5 Now check the oven's operation. Press Bake and press the number keys to set the oven temperature to 350 °F. 6 The oven should finish preheating in 15 minutes. The convection fan should operate while the oven is preheating. Model LREL6325* 7 After checking the oven's operation, turn the temperature up to 450 °F and leave the oven on for at least an hour to help remove any oil which might cause smoke and odors when first using the oven. NOTE Smoke may come out of the range when it is first used.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
18
INSTALLATION
Engaging the Anti-tip Device
•
Move the range close enough to the opening to
plug into the receptacle.
•
Slide the range into position ensuring that the back
leg slides under the anti-tip bracket. The range
should sit flush against the back wall when properly
installed.
•
Carefully attempt to tip the range forward to ensure
that the anti-tip bracket is engaged properly. If
properly installed, the anti-tip bracket will prevent
the range from being tipped. If the range can be
tipped, reinstall the range until the anti-tip bracket is
properly installed and the range will not tip forward.
•
Turn on electrical power. Check the range for
proper operation.
Test Run
Check if the range is properly installed and run a test
cycle.
1
Before using the cooktop for the first time, clean
it with a ceramic cooktop cleaner. This helps
protect the top and makes cleanup easier.
2
Press
Clear/Off
to start test.
3
Turn on each burner to the
Hi
setting to check
that the surface heating elements are working
properly. The elements should glow red and
radiate heat, and they should cycle on and off
periodically even when the setting is in the
Hi
position. This cycling prevents the glass-ceramic
from being cracked by thermal shock.
IMPORTANT
: The warming zone does not
consume enough power to glow red.
4
After checking all the surface heating elements,
check the locking system by pressing
Clear/Off
for three seconds. The oven door should lock.
Press
Clear/Off
for three seconds to disable
Lockout.
The Lockout function should disable controls for
the oven.
5
Now check the oven's operation. Press
Bake
and press the number keys to set the oven
temperature to 350 °F.
6
The oven should finish preheating in 15 minutes.
The convection fan should operate while the
oven is preheating. Model LREL6325*
7
After checking the oven's operation, turn the
temperature up to 450 °F and leave the oven on
for at least an hour to help remove any oil which
might cause smoke and odors when first using
the oven.
NOTE
Smoke may come out of the range when it is first
used.