LG LREL6321S Owners Manual - Page 51

ENGLISH Replacing the Door 1 Firmly grasp both sides of the door at the top. 2 With the door at the same angle as the removal position, seat the indentation of the hinge arms into the bottom edge of the hinge slots. The notch in the hinge arms must be fully seated into the bottom edge of the slots. Hinge arm MAINTENANCE 51 (2) Model LREL6325* Unscrew the 2 screws on the back of the drawer. 2 screws 3 Lift the front of the drawer until the stops clear the guides. Bottom edge of slot Indentation 3 Open the door fully. If the door will not open fully, the indentation is not seated correctly in the bottom edge of the slots. 4 Lock the hinge locks, rotating them back toward the slots in the oven frame until they lock. Hinge arm Hinge lock 4 Remove the drawer. Replacing the Drawer 1 Place the drawer rails on the guides. 2 Push the drawer back until it stops. 5 Close the oven door. Removing the Drawer CAUTION Disconnect the electrical power to the range at the main fuse or circuit breaker panel. Failure to do so can result in severe personal injury, death, or electrical shock. Most cleaning can be done with the drawer in place; however, the drawer may be removed if further cleaning is needed. Use warm water to thoroughly clean. 1 Pull the drawer out until it stops. 3 Lift the front of the drawer and push back until the stops clear the guides. (4) Model LREL6325* Screw the 2 screws on the back of the drawer. 2 screws 5 Lower the front of the drawer and push back until it closes.