Lenovo ThinkCentre A58e Hardware Maintenance Manual - Page 55

XX-XXX 014-3XX-XXX, USB port Interface Test Passed

Get Lenovo ThinkCentre A58e PDF manuals and user guides View all Lenovo ThinkCentre A58e manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Diagnostic Error Code 014-196-XXX Parallel port test halt, error threshold exceeded 014-197-XXX Parallel port test warning 014-198-XXX Parallel port test aborted 014-199-XXX Parallel port test failed, cause unknown 014-2XX-XXX 014-3XX-XXX Parallel port failure 015-000-XXX USB port Interface Test Passed 015-001-XXX USB port Presence 015-002-XXX USB port Timeout 015-015-XXX USB port External Loopback failure 015-027-XXX USB port Configuration/Setup error 015-032-XXX USB port Device Controller failure 015-034-XXX USB port buffer allocation failure 015-035-XXX USB port Reset condition detected 015-036-XXX USB port Register error 015-040-XXX USB port IRQ failure FRU/Action 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Diagnostics, Test and Recovery Information" on page 37 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test. See "Flash update procedures" on page 91 3. Go to "Undetermined problems" on page 63 1. Go to "Undetermined problems" on page 63 2. Flash the system and re-test. See "Flash update procedures" on page 91 3. Replace component under function test 1. External parallel device 2. System board No action 1. Remove USB device(s) and re-test 2. System board 1. Remove USB device(s) and re-test 2. System board 1. Remove USB device(s) and re-test 2. System board 1. Flash the system. See "Flash update procedures" on page 91 2. System board System board 1. Reboot the system 2. Flash the system and re-test. See "Flash update procedures" on page 91 3. Run memory test 4. System board 1. Remove USB device(s) and re-test 2. System board System board 1. Run setup and check for conflicts 2. Flash the system. See "Flash update procedures" on page 91 3. System board Chapter 7. Symptom-to-FRU Index 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Diagnostic Error Code
FRU/Action
014-196-XXX
Parallel port test halt, error threshold
exceeded
1.
Press F3 to review the log file
2.
Re-start the test to reset the log file
014-197-XXX
Parallel port test warning
1.
Make sure the component that is called out
is connected and/or enabled. See Chapter 6
“Diagnostics, Test and Recovery Information” on
page 37
2.
Re-run test
3.
Replace the component that is called out in warning
statement
4.
Replace the component under test
014-198-XXX
Parallel port test aborted
1.
If a component is called out, make sure it is
connected and/or enabled
2.
Flash the system and re-test. See “Flash update
procedures” on page 91
3.
Go to “Undetermined problems” on page 63
014-199-XXX
Parallel port test failed, cause unknown
1.
Go to “Undetermined problems” on page 63
2.
Flash the system and re-test. See “Flash update
procedures” on page 91
3.
Replace component under function test
014-2XX-XXX 014-3XX-XXX
Parallel port failure
1.
External parallel device
2.
System board
015-000-XXX
USB port Interface Test Passed
No action
015-001-XXX
USB port Presence
1.
Remove USB device(s) and re-test
2.
System board
015-002-XXX
USB port Timeout
1.
Remove USB device(s) and re-test
2.
System board
015-015-XXX
USB port External Loopback failure
1.
Remove USB device(s) and re-test
2.
System board
015-027-XXX
USB port Configuration/Setup error
1.
Flash the system. See “Flash update procedures”
on page 91
2.
System board
015-032-XXX
USB port Device Controller failure
System board
015-034-XXX
USB port buffer allocation failure
1.
Reboot the system
2.
Flash the system and re-test. See “Flash update
procedures” on page 91
3.
Run memory test
4.
System board
015-035-XXX
USB port Reset condition detected
1.
Remove USB device(s) and re-test
2.
System board
015-036-XXX
USB port Register error
System board
015-040-XXX
USB port IRQ failure
1.
Run setup and check for conflicts
2.
Flash the system. See “Flash update procedures” on
page 91
3.
System board
Chapter 7
.
Symptom-to-FRU Index
49