Lenovo ThinkCentre A58e Hardware Maintenance Manual - Page 83
Replacing a memory module, Install the heat sink and fan assembly on the system board.
View all Lenovo ThinkCentre A58e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Important To avoid damaging the microprocessor contacts, do not tilt the microprocessor when installing it into the socket. 11. Lower the microprocessor straight down into the system board socket of the system board. 12. To secure the microprocessor in the socket, close the microprocessor retainer and lock it into position with the small handle. 13. Use the thermal grease syringe to place five drops of grease on the top of the microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the grease syringe). 14. Install the heat sink and fan assembly on the system board. 15. Connect the heat sink and fan assembly cable to the system board. See the system board illustration for your machine type at "System board connectors" on page 66. 16. Go to "Completing the FRU replacement" on page 84. Replacing a memory module Attention Do not open your computer or attempt any repair before reading and understanding the "Important safety information" in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to install or replace a memory module. Chapter 8. Replacing FRUs (Type 0841) 77