Lenovo ThinkPad Edge L330 (English) User Guide - Page 46
Using the Extend desktop function
View all Lenovo ThinkPad Edge L330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
• Click the Monitor tab and select a color value from the Colors field. • Click OK. Considerations for attaching an external monitor • When installing an operating system, you must install the display driver for your monitor that is supplied with the computer, and the monitor INF file that is supplied with the external monitor. • If you set a resolution higher than the resolution you are using on the computer monitor, and use an external monitor that does not support that resolution, take advantage of the virtual screen function, which enables you to display only a part of the high-resolution screen image your computer produces. You can see other parts of the image by moving the screen with the TrackPoint pointing device or another pointing device. • If the external monitor you are using is outdated, the resolution and the refresh rate might be limited. Using the Extend desktop function Your computer supports a function named the Extend desktop. With the Extend desktop function, you can display output on both the computer display and an external monitor. You also can display different desktop images on each monitor. Considerations for using the Extend desktop function • When an application using DirectDraw or Direct3D is played in full-screen mode, it is shown only on the primary display. • If you want to show DOS full-screen while in the Extend desktop mode, only the primary display shows DOS; the other display is blacked out. • If your computer has the Intel graphics card, you can designate the other display as the primary display by doing the following: 1. Press Ctrl+Alt+F12. The Intel Graphics and Media Control Panel window opens. 2. Select Advanced Mode and click OK. 3. Click Multiple Display. 4. Select the desired display as the primary display. Enabling the Extend desktop function To enable the Extend desktop function, do the following: 1. Connect the external monitor to the monitor connector; then connect the monitor to an electrical outlet. 2. Turn on the external monitor. 3. Press Fn+F7, then select Extend. To change the resolution and color quality for each monitor, do the following: 1. Right-click on the desktop, and click Screen resolution. 2. Click the monitor-1 icon (for the primary display, the computer display). 3. Set the resolution for the primary display. 4. Click the monitor-2 icon (for the secondary display, the external display). 5. Set the resolution for the secondary display. 6. Click Advanced settings and set up the color quality on the Monitor tab. 7. Click OK to apply the changes. 32 User Guide