Lexmark C748 Quick Reference - Page 7

Loading the multipurpose feeder The multipurpose feeder can hold approximately: • 100 sheets of 75‑g/m2 (20‑lb) paper • 10 envelopes • 75 transparencies Note: Do not add or remove paper or specialty media while the printer prints from the multipurpose feeder or when the printer control panel indicator light is blinking. Doing so may cause a jam. 1 Press the tray release latch to the left, and then pull the multipurpose feeder down. Envelopes Transparencies* 6 5 4 LTAR4&LGL BE5XEC A5 3 1 Maximum paper fill indicator 2 Tray release latch 3 Paper release lever 4 Paper size indicators 5 Paper width guide 6 Width guide release tab 2 1 2 Gently pull the extension out until it is fully extended. * Avoid touching the printable side of transparencies. Be careful not to scratch them. 4 Load the paper or specialty media. Slide the stack into the multipurpose feeder until it comes to a stop. 3 Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface. Paper * Avoid touching the printable side of transparencies. Be careful not to scratch them. 7