Lexmark C748 User's Guide - Page 145

Understanding printer menus Universal Setup menu Use Units of Measure Inches Millimeters Portrait Width 3-48 inches 76-1219 mm Portrait Height 3-48 inches 76-1219 mm Feed Direction Short Edge Long Edge Reports menu Reports menu Use Menu Settings Page Device Statistics Network Setup Page 145 To Specify the unit of measure. Note: Inches is the US factory default setting. Millimeters is the international factory default setting. Set the width for a portrait page orientation. Notes: • 8.5 inches is the US factory default setting. 216 mm is the international factory default setting. • If the specified width exceeds the maximum, then the printer uses the maximum width allowed. • The width can be increased in 0.01-inch or in 1-mm increments. Set the height for a portrait page orientation. Notes: • 14 inches is the US factory default setting. 356 mm is the international factory default setting. • If the specified height exceeds the maximum, then the printer uses the maximum height allowed. • The height can be increased in 0.01-inch or in 1-mm increments. Specify the feed direction. Notes: • Short Edge is the factory default setting. • Long Edge appears only when the paper or specialty media can be loaded in either direction. To Print a report containing information about the paper loaded in trays, installed memory, total page count, alarms, timeouts, printer control panel language, TCP/IP address, status of supplies, status of the network connection, and other information. Print a report containing printer statistics such as supply information and details about printed pages. Print a report containing information about the network printer settings, such as the TCP/IP address information. Note: This menu item appears only in network printers or in printers connected to print servers.