Lexmark C748 User's Guide - Page 229

Troubleshooting 229 Notes: • All four photoconductors should be replaced at the same time. • Make sure to reset the maintenance counter after replacing the photoconductors for optimum print quality. 3 Select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm. 84.xx Replace [color] photoconductor 1 Replace the photoconductor, following the instruction sheet that came with the replacement supply. Notes: • All four photoconductors should be replaced at the same time. • Make sure to reset the maintenance counter after replacing the photoconductors for optimum print quality. 2 Select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm. 84.xx [Color] photoconductor missing Install the specified color photoconductor. For instructions on installing the photoconductor, select More Information on the printer control panel. 88.xx [color] cartridge nearly low Order a replacement for the specified toner cartridge. 88.xx [color] cartridge low 1 Remove the specified cartridge. Warning-Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print quality of future print jobs. 2 Firmly shake the cartridge side‑to‑side and front‑to‑back several times to redistribute the toner. 3 Reinsert the cartridge, and then touch Continue to clear the message and continue printing. Notes: • Repeat this procedure multiple times until the print remains faded. When the print remains faded, replace the cartridge. • Have a new cartridge available when the current one no longer prints satisfactorily.