Lexmark E323 User's Reference - Page 82
call for service, Using the Local, Printer Setup Utility
UPC - 734646384216
View all Lexmark E323 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Problem Faint images or repetitive spots appear on the page. Pages are blank. What to do • Try a different type of paper. Paper designed for copiers gives the best quality. • Replace the print cartridge. • The print cartridge may be out of toner. Replace the cartridge. • You may have a software error. Try turning the printer off and back on. The printer has missing or damaged • Contact the place where you bought your printer. parts. The operator panel lights do not come on when the printer is turned on. • The lights may take a few seconds to come on. • Make sure the power cord is firmly plugged in at the back of the printer and at the electrical outlet. You cannot close the top cover. • Make sure the print cartridge is positioned correctly. The printer is on, but nothing prints. • Make sure the print cartridge is installed. • Make sure the parallel or USB cable is firmly plugged into the connector on the back of the printer. • Press and release Continue to print a menu settings page to determine if the problem is with the printer or the computer. - If you can print a menu settings page, the problem is in the computer or the software application. - If you cannot print a menu settings page, call for service. The Toner Low light is on and printing stops. • If the Toner Low alarm is enabled, the printer stops printing until you replace the print cartridge. Note: To change the Toner Low Alarm setting, install the Local Printer Setup Utility from the drivers CD (see Using the Local Printer Setup Utility). The printer is on and the Error light • Make sure the printer cover is closed. is on. Ready/Data Toner Low Load Paper Paper Jam Error Press Continue Continue Cancel 82