Lexmark MX611 User's Guide - Page 150
Reports Menu
View all Lexmark MX611 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Understanding the printer menus 150 Use Portrait Width 3-8.5 inches 76-216 mm Portrait Height 3-14.17 inches 76-360 mm Feed Direction Short Edge Long Edge Reports Menu Reports menu Use Menu Settings Page Device Statistics Network Setup Page Network [x] Setup Page To Set the portrait width. Notes: • If the width exceeds the maximum, then the printer uses the maximum width allowed. • 8.5 inches is the US factory default setting. You can increase the width in 0.01‑inch increments. • 216 mm is the international factory default setting. You can increase the width in 1‑mm increments. Set the portrait height. Notes: • If the height exceeds the maximum, then the printer uses the maximum height allowed. • 14 inches is the US factory default setting. You can increase the height in 0.01‑inch increments. • 356 mm is the international factory default setting. You can increase the height in 1‑mm increments. Specify the feed direction if the paper can be loaded in either direction. Notes: • Short Edge is the factory default setting. • Long Edge appears only when the longest edge is shorter than the maximum width supported in the tray. To Print a report containing information about the paper loaded in trays, installed memory, total page count, alarm settings, timeouts, printer control panel language, TCP/IP address, status of supplies, status of the network connection, and other information. Print a report containing printer statistics such as supply information and number of printed pages. Print a report containing information about the network printer settings, such as the TCP/IP address information. Note: This menu item appears only in network printers or in printers connected to print servers. Print a report containing information about the network settings of the printer, such as the TCP/IP address information. Note: This menu item appears only in network printers or printers connected to print servers, and when there is more than one network option installed.