Lexmark MX611 User's Guide - Page 154
TCP/IP menu, Network/Ports, Standard Network, TCP/IP, Network [x], Network [x] Setup - dn
View all Lexmark MX611 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Understanding the printer menus 154 TCP/IP menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > TCP/IP • Network/Ports > Network [x] > Network [x] Setup > TCP/IP Note: This menu is available only in network printers or printers attached to print servers. Use To Set Hostname Set the current TCP/IP host name. Note: This can be changed only from the Embedded Web Server. IP Address View or change the current TCP/IP address. Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that support BOOTP and RARP. Netmask View or change the current TCP/IP netmask. Gateway View or change the current TCP/IP gateway. Enable DHCP On Off Specify the DHCP address and parameter assignment. Note: On is the factory default setting. Enable RARP On Off Specify the RARP address assignment setting. Note: Off is the factory default setting. Enable BOOTP On Off Specify the BOOTP address assignment setting. Note: On is the factory default setting. Enable AutoIP Yes No Specify the Zero Configuration Networking setting. Note: Yes is the factory default setting. Enable FTP/TFTP Yes No Enable the built-in FTP server, which lets you send files to the printer using File Transfer Protocol. Note: Yes is the factory default setting. Enable HTTP Server Yes No Enable the built-in Web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a Web browser. Note: Yes is the factory default setting. WINS Server Address View or change the current WINS server address. Enable DDNS Yes No View or change the current DDNS setting. Note: Yes is the factory default setting. Enable mDNS Yes No View or change the current mDNS setting. Note: Yes is the factory default setting. DNS Server Address View or change the current DNS server address.