Lexmark MX611 User's Guide - Page 156
AppleTalk menu, Network/Ports, Standard Network, AppleTalk, Network [x], Network [x] Setup
View all Lexmark MX611 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Understanding the printer menus 156 Use Wi‑Fi Protected Setup (WPS) Start Push Button Method Start PIN Method Enable/Disable WPS Auto‑detection Enable Disable Network Mode BSS Type Infrastructure Ad hoc Compatibility 802.11b/g 802.11b/g/n Choose Network View Signal Quality View Security Mode To Establish a wireless network connection and enable network security. Notes: • Start Push Button Method connects the printer to a wireless network when buttons on both the printer and the access point (wireless router) are pressed within a given period of time. • Start PIN Method connects the printer to a wireless network when a PIN on the printer is entered into the wireless settings of the access point. Automatically detect the connection method that an access point with WPS uses-Start Push Button Method or Start PIN Method. Note: Disable is the factory default setting. Specify the network mode. Notes: • Infrastructure is the factory default setting. This lets the printer access a network using an access point. • Ad hoc configures a wireless connection directly between the printer and a computer. Specify the wireless standard for the wireless network. Note: The 802.11b/g/n is the factory default setting. Select an available network for the printer to use. View the quality of the wireless connection. View the encryption method for the wireless network. AppleTalk menu Note: This menu appears only in printer models that are connected to an Ethernet network or when an optional wireless network adapter is installed. To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > AppleTalk • Network/Ports > Network [x] > Network [x] Setup > AppleTalk Use Activate Yes No View Name To Enable or disable AppleTalk support. Note: Yes is the factory default setting. Show the assigned AppleTalk name. Note: The AppleTalk name can be changed only from the Embedded Web Server.