Lexmark MX611 User's Guide - Page 173

Understanding the printer menus Use Print Recovery Auto Continue Disabled 5-255 Print Recovery Jam Recovery On Off Auto Print Recovery Jam Assist On Off Print Recovery Page Protect Off On Press Sleep Button Do Nothing Sleep Hibernate Press and Hold Sleep Button Do Nothing Sleep Hibernate 173 To Let the printer automatically continue printing from certain offline situations when not resolved within the specified time period. Note: Disabled is the factory default setting. Specify whether the printer reprints jammed pages. Notes: • Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks. • On sets the printer to always reprint jammed pages. • Off sets the printer to never reprint jammed pages. Set the printer to automatically check for jammed paper. Note: On is the factory default setting. Let the printer successfully print a page that may not have printed otherwise. Notes: • Off is the factory default setting. This prints a partial page when there is not enough memory to print the whole page. • On sets the printer to process the whole page so that the entire page prints. Determine how the printer responds to a short press of the Sleep button when the printer is idle. Note: Sleep is the factory default setting. Determine how the printer responds to a long press of the Sleep button when the printer is idle. Notes: • Do Nothing is the factory default setting. • Sleep or Hibernate sets the printer to operate at a lower power configuration. • If the printer is in Sleep Mode, then the touch screen appears off and the Sleep button turns amber in color. • Press and hold the Sleep button for 3 seconds or longer to enter Hibernate mode. • Touch anywhere on the touch screen or press a button on the printer control panel to exit Sleep Mode.