Lexmark MX611 User's Guide - Page 240

Clearing jams 240 Jam access area Printer control panel message What to do 1 Automatic [x]‑page jam, open ADF to clear Remove all paper from the ADF tray, and then remove the document feeder jam. [28y.xx] jammed paper. (ADF) 2 Standard bin [x]‑page jam, clear standard bin. [20y.xx] Remove the jammed paper. 3 Front door [x]‑page jam, open front door. [20y.xx] Open the front door, then remove the toner cartridge and imaging unit, and then the jammed paper. 4 Multipurpose feeder [x]‑page jam, clear manual feeder. [25y.xx] Remove all paper from the multipurpose feeder, and then remove the jammed paper. 5 Tray 1 [x]‑page jam, remove tray 1 to clear duplex. [23y.xx] Pull out tray 1 completely, then push the front duplex flap down, and then remove the jammed paper. Note: You may need to open the rear door to clear some 23y.xx paper jams. 6 Tray [x] [x]‑page jam, open tray [x]. [24y.xx] Pull the indicated tray out, and then remove the jammed paper. 7 Rear door [x]‑page jam, open rear door. [20y.xx] Open the rear door, and then remove the jammed paper. 8 Finisher rear door [x]-page jam, remove all pages from the finisher's accumulator. Leave paper in bin [45y.xx] • Open the finisher rear door, and then remove the jammed paper. • Open the trap door, and then remove the jammed paper. 9 Finisher output bin [x]-page jam, remove all pages • Move the left tamper arm to the left and the right from the output bin. Leave paper tamper arm to the right, and then remove the jammed in bin [45y.xx] paper from the finisher bin. • Open the finisher rear door and the trap door, and then remove any jammed pages.