Lexmark X748 Quick Reference - Page 12
Notes, Warning-Potential Damage
View all Lexmark X748 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
1 Press the tray release latch to the left, and then pull the multipurpose feeder down. 3 Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface. Paper 4 Load the paper or specialty media. Slide the stack into the multipurpose feeder until it comes to a stop. 2 Gently pull the extension out until it is fully extended. Envelopes Transparencies* * Avoid touching the printable side of transparencies. Be careful not to scratch them. Notes: • Make sure paper or specialty media does not exceed the maximum paper fill indicator. • Load only one size and type of paper or specialty media at a time. • Paper or specialty media should lie flat and fit loosely in the multipurpose feeder. • If the paper or specialty media is pushed too far into the multipurpose feeder, then press the paper release lever to remove it. • Load envelopes with the flap on the right side up and the stamp edge entering the printer first. Warning-Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives. These envelopes may severely damage the printer. 5 From the printer control panel, verify the paper size and paper type setting for the feeder based on the paper you loaded. 12