Marantz SR5008 Owner's Manual in English - Page 170

Contents Connections Playback Distances Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. 22Unit Set the unit of distance. Feet (Default) Meters 22Step Set the minimum variable width of the distance. 1ft (Default) / 0.1ft 0.1m / 0.01m 22Set Defaults The "Distances" settings are returned to the default settings. 22Set the distance 0.0ft - 60.0ft / 0.00m - 18.00m % • The speakers that can be selected differ depending on the "Amp Assign" (vpage 167) and "Speaker Config." (vpage 168) settings. • Default settings : Front L / Front R / F. Height L / F. Height R / Center / Subwoofer : 12.0 ft (3.60 m) Surround L / Surround R / Surr. Back L / Surr. Back R : 10.0 ft (3.00 m) • Set the difference in the distance between the speakers to less than 20.0 ft (6.00 m). Settings Tips Appendix Levels Set the volume of the test tone to be the same when it is output from each speaker. 22Test Tone Start Output test tone. A test tone is output from the selected speaker. While listening to the test tone, adjust the volume output from the selected speaker. -12.0dB - +12.0dB (Default : 0.0dB) % • When "Levels" is adjusted, the adjusted values are set for all the sound modes. • When headphones are connected to the PHONES connector on this unit, you cannot set "Levels". 22Set Defaults The "Levels" settings are returned to the default settings. Front panel Display Rear panel 170 Remote Index