Marantz SR5008 Owner's Manual in English - Page 177

General, Language, ZONE2 Setup

Page 177 highlights

Contents Connections Playback General Make various other settings. Language Set the language for display on the menu screen. English (Default) / Français / Español % • "Language" can also be set by the following procedure. However, the menu screen is not displayed. Following the display content to make the setting. 1. Press and hold the main unit's ZONE2 SOURCE and STATUS for at least 3 seconds. "Video Format " appears on the display. 2. Press the main unit's DISPLAY. "GUI Language ENGLISH" appears on the display. 3. Use the main unit's PRESET CH +, - and set the language. 4. Press the main unit's STATUS to complete the setting. Settings Tips Appendix ZONE2 Setup Set the audio to play back with multi-zone (ZONE2). % • The setting values (dB) for "Volume Limit" and "Power On Volume" are what is displayed when "Scale" (vpage 144) in the menu is set to "-79.5dB - 18.0dB". 22Lch Level Adjust the left channel output level. -12dB - +12dB (Default : 0dB) 22Rch Level Adjust the right channel output level. -12dB - +12dB (Default : 0dB) 22Volume Level Set the volume output level. Variable (Default) : Volume adjustment is enabled by main unit and remote control unit. 1 - 98 (-79dB - 18dB) : The volume is adjusted to the set level. Front panel Display Rear panel 177 Remote Index

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238

177
Appendix
Tips
Playback
Connections
Contents
Front panel
Display
Rear panel
Index
Remote
Settings
Language
Set the language for display on the menu screen.
English
(Default) /
Français
/
Español
%
“Language” can also be set by the following procedure. However, the menu
screen is not displayed.
Following the display content to make the setting.
1.
Press and hold the main unit’s ZONE2 SOURCE and STATUS for at least 3
seconds.
“Video Format <NTSC>” appears on the display.
2.
Press the main unit’s DISPLAY.
“GUI Language ENGLISH” appears on the display.
3.
Use the main unit’s PRESET CH +, – and set the language.
4.
Press the main unit’s STATUS to complete the setting.
General
Make various other settings.
ZONE2 Setup
Set the audio to play back with multi-zone (ZONE2).
%
The setting values (dB) for “Volume Limit” and “Power On Volume” are what is
displayed when “Scale” (
v
page 144) in the menu is set to “–79.5dB – 18.0dB”.
2
Lch Level
Adjust the left channel output level.
–12dB – +12dB
(Default : 0dB)
2
Rch Level
Adjust the right channel output level.
–12dB – +12dB
(Default : 0dB)
2
Volume Level
Set the volume output level.
Variable
(Default) : Volume adjustment is enabled by main unit and
remote control unit.
1 – 98 (–79dB – 18dB)
: The volume is adjusted to the set level.