Marantz SR5008 Owner's Manual in English - Page 172

Contents Connections Playback Bass Set subwoofer and LFE signal range playback. 22Subwoofer Mode Select low range signals to be reproduced by subwoofer. LFE (Default) : The low range signal of the channel set to "Small" speaker size is added to the LFE signal output from the subwoofer. LFE+Main : The low range signal of all channels is added to the LFE signal output from the subwoofer. This is usually the best setting for most systems. % • "Subwoofer Mode" can be set when "Speaker Config." - "Subwoofer" (vpage 168) is set to other than "No". • Play music or a movie source and select the mode offering the strongest bass. • If "Front" and "Center" for "Speaker Config." (vpage 168) are set to "Large", and "Subwoofer Mode" is set to "LFE", no sound may be output from the subwoofers, depending on the input signal or selected sound mode. Select "LFE+Main" if you want the bass signals to always be produced from the subwoofer. 22LPF for LFE Set LFE signal playback range. Set this when you want to change the playback frequency (low pass filter point) of the subwoofer. 80Hz / 90Hz / 100Hz / 110Hz / 120Hz (Default) / 150Hz / 200Hz / 250Hz Settings Tips Appendix Front Speaker Set the front speakers to use. % • This can be set when "Assign Mode" (vpage 167) is set to "Front B". A (Default) : Front speaker A is used. B : Front speaker B is used. A+B : Both front speakers A and B are used. Front panel Display Rear panel 172 Remote Index